Proteus Design Suite 9.2 SP1 Win x64

Software Overview

---

Proteus Design Suite provides an integrated environment for creating electronic schematics, simulating circuit behavior, and designing PCB layouts. Its simulation capabilities allow designers to test electronic circuits and microcontroller-based systems within a virtual environment.
The suite is available in configurations intended for different design sizes and microcontroller simulation requirements. PCB design products include an autorouter and mixed-mode SPICE simulation capabilities, supporting workflows from circuit development through board layout.
Key Features

---

• Schematic capture for electronic circuit design.
• Circuit simulation with mixed-mode SPICE capabilities.
• Printed circuit board (PCB) layout design.
• Microcontroller simulation.
• PCB autorouting.
• Electronic design and prototyping workflows.
• Virtual simulation of IoT projects.
• CAN bus simulation for multi-node network designs.
• Simulation support for selected STM32F407 variants.
• ProPilot assistance for schematic editing in beta.
• Polar coordinate support for Measure & Move operations.
• Simulation models for a range of electronic components.

Why Choose Proteus Design Suite

---

Proteus Design Suite is intended for electronics development workflows that require schematic creation, simulation, and PCB layout within a connected design environment. Engineers and technicians can use it to test circuits and embedded designs before moving to physical prototypes.
Its combination of circuit simulation, PCB design, and microcontroller support also makes it suitable for educational environments where students need to study electronics, embedded systems, and board design through virtual projects.
What's New

---

Cortex M4 - STM32F407 Variants

• Simulation support has been added for STM32F407IE, STM32F407IG, STM32F407ZE, STM32F407VE, STM32F407VG, and STM32F407ZG.

Automotive CAN Bus

• CAN bus simulation is now supported for training and higher education.
• Standalone CAN modules and built-in microcontroller CAN peripherals can be connected through CANH/CANL wiring and simulated together.
• CAN bus traffic can be viewed in the simulation analyser for multi-node network development, testing, and debugging.

ProPilot Drawing Tool (BETA)

• ProPilot can draw and edit schematics when the Schematic Drawing Tools option is enabled in its settings.
• The beta drawing capabilities allow components to be placed, connections to be wired, nets to be routed, and other schematic edits to be performed with assistance from ProPilot.

Measure & Move Polar Mode

• In Z-Theta mode, Measure & Move operates as a radial measurement tool and displays angle and distance instead of X/Y offsets.

Schematic and PCB Fixes

• Output Job Manager options now remain at their last selected settings, including Assembly Description and Include SMT.
• Local Zone regeneration has been improved for large boards where the zone floods the board.
• Output Job Manager can use the project folder as the output folder.
• Replace Component no longer moves the Footprint Value origin.
• Graphics on Resist layers can now be selected.
• Highlight Schematic Net functionality has been corrected.
• The ProPilot HTTP 400 error involving modified thinking blocks has been fixed.
• The Watch window now retains variable values after a simulation Stop and Start.
• Pad and track dotted-line highlighting has been restored.
• Make Device Properties now correctly applies Specific properties.
• Vias can be created with less than a 5th annular ring.
• Track routing no longer snaps tracks to tracks on other layers.
• Intermittent timed breakpoint problems during interactive simulation have been fixed.
• GraphDevices.DLL UAE issues involving active components during graph simulation have been fixed.
• Netlist.DLL UAE issues involving missing pins referenced by Diff Pair configuration have been fixed.
• Stock code is now overwritten correctly when replacing components.
• UAE issues involving an existing schematic with its tab closed in the workspace file have been fixed.
• The Generating Bitmap message no longer remains stuck in the title bar.
• Zone punch-out corruption under certain conditions has been fixed.
• Arduino TWI slave clock stretching has been corrected.
• Via Tidy now updates its list correctly.
• Opening RCC while placing a pad no longer leaves the application in a stuck state.
• Track dragging can now be initiated with a right-click followed by a left-click while in Track mode.
• Zone filling no longer creates flipped-solid holes under the affected circumstances.
• The Make Device form automatically widens its library list to accommodate library names.
• DRC errors outside the Work area are now handled correctly.
• Highlight Net from the PCB no longer selects a same-numbered net on the wrong board.
• Unplated holes are now displayed as unplated in the 3D Viewer.
• Measure & Move now correctly aligns vector fonts in Closest Point mode.
• Track dragging with Snap to Grid has received a minor adjustment.
• Ignored DRCs are retained after a DRC change.
• Edit > Tidy now clears solid track nodes.
• Modify Route no longer converts all tracks to the same layer when a via is involved.
• Text in exported PCB PDFs can now be selected when Text as Curves is disabled.
• Moving an end track node in Unconstrained routing mode no longer causes random track movement.

Simulation Models

• The OPA167X model has been fixed.
• AT27C1024, 1Mb (64k x 16) OTP Read-only Memory has been added.
• AT27C2048, 2Mb (128k x 16) OTP Read-only Memory has been added.
• AT27C4096, 4Mb (256k x 16) OTP Read-only Memory has been added.
• GK152 Opto interrupter has been added.
• INA226AIDGS, a 36V 16-Bit I2C output current, voltage, and power monitor with alert, has been added.
• OPA1671, a 13-MHz low-noise rail-to-rail audio operational amplifier model, has been added.
• Additional crash dump fixes have also been included beyond those listed above.

System Requirements

---

Windows *
Frequently Asked Questions

---

What is Proteus Design Suite used for?

---

Proteus Design Suite is used for schematic capture, electronic circuit simulation, microcontroller simulation, and PCB layout design.
Can Proteus simulate microcontrollers?

---

Yes. The suite includes microcontroller simulation capabilities, with the 9.2 SP1 release adding simulation support for six STM32F407 device variants.
Does Proteus support CAN bus simulation?

---

Yes. Proteus 9.2 SP1 adds CAN bus simulation support, allowing standalone CAN modules and microcontroller CAN peripherals to communicate through CANH/CANL connections within the simulation environment.
What is ProPilot Drawing Tool?

---

ProPilot Drawing Tool is a beta feature that can assist with schematic editing when the Schematic Drawing Tools option is enabled. It can place components, create connections, route nets, and perform other schematic edits.
Does Proteus include PCB design tools?

---

Yes. Proteus Design Suite includes PCB layout design capabilities, and PCB design products include an autorouter and mixed-mode SPICE simulation capabilities.
Home Page

---

Product Information

---

• Software Name: Proteus Design Suite
• Version:Pro 9.2 SP1 Build 45801.1
• Architecture:x64
• Languages:english
• License type:Full Version
• File Size:906.7 mb